Key Features: ~ Over 250 drives erased per hour ~ Complete erasure of hard drives and tapes ~ Processor Controlled operation for Failsafe erasure ~ Effective on Longitudinal & Perpendicular Hard Drives The DATAGONE is a fully
automatic degausser for Hard Drives and Backup tapes. It uses pulse
discharge technology and is fully processor controlled which enables the
DATAGONE to offer a complete and secure erase on magnetic media. Media
that can be degaussed includes Hard Drives that use both perpendicular
and vertical recording techniques and most common backup tapes including
DLT, LTO, 8mm, DDS and more. Operation
When the degauss cycle is complete, the hard drive is released and exits from the degausser on the right hand side. Throughout the entire degauss cycle the onboard processor monitors the procedure and progress messages are displayed on the LCD panel. If the degauss cycle is interrupted for any reason such as power loss or any fault condition, the media is retained in the DATAGONE and the operator is immediately alerted to the interruption in the erasure cycle on the LCD panel. To eject media when the cycle has failed for any reason the operator has to press the reset button. This releases the Hard Drive or Tape and resets the degauss cycle. The operator should then attempt a repeat erasure. The entire erasure process takes approximately 8 seconds. Who Recommends Hard Drive Degaussing?
Note: After degaussing, hard drives should not be not be reused as they are stressed in the erasure process.
The DATAGONE is manufactured by VS Security Products.
|